Categories

Login / Register
  support@swd.com.au phone  1300 669 122
 

Warranty Considerations

Warranty Considerations

Zetti Emissions

NOTE:

Upon purchase of any Zetti Emission product you must fill out and return the Zetti Emissions Warranty Certificate to validate your warranty. Click here to download the certificate.

Before making any Zetti Emissions DPF warranty claim, you must fill out and return the claim form, which can be downloaded here.

DPF Warranty

All SWD Diesel Particulate Filters (DPF) are covered by a 2 year limited warranty.

FAILURE TO FOLLOW THE BELOW WILL VOID THE WARRANTY.

A warranty claim may be rejected for the following reasons:

  • The Zetti Emissions Warranty Certificate must be filled out and returned as soon as the buyer takes delivery of the emission product. Failure to do so will result in the warranty being void.
  • DPF’s are only covered for structural failure. A DPF returned due to blockage will not be considered as a warranty claim.
  • Breakup of the monolith caused by excessive vibrations or accident will not be considered as a warranty claim.
  • Use of oil not conforming to the specifications given by the vehicles’ manufacturer.
  • Use of biodiesel in the vehicle.
  • Obstruction of the monolith caused by use of exhaust paste.
  • Obstruction of the monolith caused by oil or antifreeze entering the exhaust system
  • Failure to immediately follow the manufacturers instructions when the DPF warning light illuminates.
  • For vehicles using an additive to assist in the regeneration process this additive was not used.
  • All engine faults that caused the original DPF to fail are not rectified.
  • The ECU was not reset at the time of replacing the new DPF
  • Gaskets and mountings were not replaced at the time of fitting of the new DPF.

YOU MUST run a forced Regeneration on the new DPF BEFORE DRIVING THE VEHICLE.

Catalytic Converter Warranty

All SWD catalytic converters are covered by a 2 year limited warranty.

A warranty claim may be rejected for the following reasons:

  • Catalytic converters are only covered for structural failure. A catalytic converter returned due to blockage or meltdown will not be considered as a warranty claim.
  • Breakup of the substrate caused by excessive vibrations or accident will not be considered as a warranty claim.
  • Use of oil not conforming to the specifications given by the vehicles’ manufacturer.
  • Obstruction of the substrate caused by use of exhaust paste.
  • Obstruction of the substrate caused by oil or antifreeze entering the exhaust system.
  • All engine faults that caused the original catalytic converter to fail are not rectified.
  • Gaskets and mountings where not replaced at the time of fitting of the catalytic converter.
  • The incorrect catalytic converter was fitted according to the Euro rating of the vehicles and engine capacity.
  • The catalytic converter was modified in any way.

Oxygen Sensor Warranty

All SWD Oxygen Sensors are covered by a 2 year limited warranty

A warranty claim may be rejected for the following reasons:

  • The use of non-oxygen sensor safe silicone upstream of the oxygen sensor.
  • The use of exhaust paste upstream of the oxygen sensor.

DPF Tool

SWD provides a 24 month warranty from date of purchase for all DPF Tools.

Performance Products

Welding to the Barrel

When installing a Stainless Cannon or Universal Muffler, refrain from welding support mounts directly to the muffler. This type of fitment practise will void warranty.

We recommend you install a barrel ring and mount support brackets from the barrel ring. See our range of barrel rings and rods.

Weld Slag

When welding in or around the Stainless Steel Cannon, Universal Muffler or Tip avoid weld splatter from hitting the product as it will rust and look unsightly. We recommend you use an anti-spatter spray.

Noise and Emission Levels

When fitting any Performance product, it is the obligation of the fitment centre to ensure the vehicle meets with the Australian states or territory requirements for noise and emissions levels.

4x4 Performance Exhaust

Disclaimer

All systems advertised in this catalogue are for Race Use Only.

All warranties on mild steel systems become void if systems are used in BEACH / SALTWATER DRIVING.

All off-road warranties are only approved at the discrection of SWD Australia Pty Ltd and the manufacturer.

Trade Marks

The name(s) PACEMAKER ® / KING BROWN ® is a Registered Trademark and can not be copied in any way shape or form.

SWD is the official distributor for PACEMAKER ® / KING BROWN ® products in QLD & NSW.

The name XFORCE ® is a Registered Trademark and can not be copied in any way shape or form.

SWD is a distributor for XFORCE ® products in Australia.

Towbars & Towing Products

All towing products are on lifetime warranty covered by the manufacturers. Please contact SWD for the details.

SWD PTY LTD

122-124 Compton Road, Woodridge QLD 4127

Tel: 07 3451 7888

Fax: 07 3451 7800

WARRANTY / MANUFACTURERS STATEMENT

BTA Towing Equipment - 6 Brand Road, Knoxfield VIC 3180

BTA Towing Equipment Warranty Statement

BTA Towbars are designed and manufactured to meet the requirements of Australian Design Rule 62-00.

Boronia Towbars are sold with a lifetime replacement warranty provided that the towbar/hitch receiver has not been misused or overloaded and is used for towing purposes only.

Boronia Towbars can be used in conjunction with 80kg and 120kg level rides as long as the tow ball load is not exceeded. Weight distribution is approved for use in conjunction with most BTA class 4 hitches, however there are certain hitches that are not suitable.

Please refer to distributor/manufacturer for further details.

BTA Towbar Manufacturers Statement

All tow ball weights listed in the Boronia Towbars catalogue are gained by using the standard tow ball mount.

The only way to obtain 10% of a class 4 towbars’ rated towing capacity on the tow ball, is by using a weight distribution hitch.

Boronia Towbars recommend in the case of increased tow ball loads, the advice of a suspension expert should be sought, as the heavier load could impact negatively on the standard suspension of the motor vehicle. In some cases, upgrading the rear suspension could also reduce the need for a weight distribution hitch, as standard (90kg or 120kg) level rides may be a suitable replacement.

Before towing always refer to the vehicle manufacturers’ specifications as tow ratings and tow ball loads can vary.

*† A Certified engineer is required to weld custom fitted towbars to be authorised as compliant.

*^ Recovery Equipment - Safety Warning: Use of this product and participation involves inherent risks of injury or death. All recovery gear can be potentially dangerous, and great care must be taken at all times. Professionally trained recovery specialists should be consulted before using this product.